About Me

Name: zhonghui
Loading...

The importance of a good submersible pumps manufacturer

Posted by zhonghui on Thursday, July 07, 2011 4:14:50 AM
Electric submersible pumps employ a high voltage AC power source that differs from 3 to 5 kilo volts. Submersible  pumps manufacturer that is able to work at high pressure as properly as at high temperature and allows to pump essential oil from deep properlys. ESP engineering has founded a substantial reputation as a reasonable upkeep and cost effective alternative in essential oil and petroleum marketplace.

Electric submersible pump embodies inlet at the bottom and outlet at the top, is powered by Electric motor that is airtight, which contains in the pump body. ESP sports activities gas separator that has enhanced the overall performance of the otdr further and allows to render a big volume of Essential oil or gas.

There are several dominating factors such as the wide distribution of the properlys in the field, production with high water cut at the properlys, leak-100 % free, low surface profile method, compatible with environmental sensitivity and safety in unmanned location which make axial pump the most preferred choice for the field.


Email ItEmail It | Print ItPrint It | CommentsComments (0) | TrackbacksTrackbacks (0) | Flag as offensiveFlag as Offensive

A pipe extrusion line for producing pipes

Posted by zhonghui on Monday, April 11, 2011 1:34:32 AM
A pipe extrusion line for producing pipes with different diameter includes an extruder for plasticizing a starting material to produce a melt strand, an adjustable calibration device sizing the melt strand to shape for forming a molten tube.

A cooling device for cooling the tube, and a roll assembly for guiding the tube during advance through the calibration device and the cooling device, wherein the roll assembly includes a plurality of rolls arranged behind one another in a travel direction and constructed to have at least two different roll geometries, and an adjustment device for automatically positioning the rolls in vertical direction in dependence on a diameter of a pipe being produced.

The rolls may also be constructed in such a way as to laterally support also the smallest pipes to be produced. Such pipes are preferably arranged in the area of the vacuum tank. The subsequent spray baths may use roll geometries which are configured in the form of a wall washer light so that the pipe is guided also in this case always on both rear sides.

Email ItEmail It | Print ItPrint It | CommentsComments (0) | TrackbacksTrackbacks (0) | Flag as offensiveFlag as Offensive

A sealed water bath is to take action in the plastic recycling line

Posted by zhonghui on Wednesday, March 23, 2011 2:19:07 AM
In the tube or plastic recycling line, a sealed water bath is to take action to strictly control the vacuum and prevent the newly formed, still molten tube or collapse. Products such as plastic film, heat set by cooling rolls through traction.

Sometimes on the same line may appear before the secondary processing operation has been completed. In the tape manufacturing, the second extruder melts adhesives and plastic sheet application, and it is hot. Once the recycling machine has cooled, spool, or cut into lengths for later use.

Transfer to a plate into the mold after the molten plastic circuit breaker. What is the mold to its shape and the blood pressure monitor must be designed so that the molten plastic evenly from a cylindrical profile, the profile shapes of the product flow.

Email ItEmail It | Print ItPrint It | CommentsComments (0) | TrackbacksTrackbacks (0) | Flag as offensiveFlag as Offensive

A pipe extrusion line manufacturer for producing pipes of different diameter

Posted by zhonghui on Friday, February 11, 2011 9:51:10 PM
Cooling of the pipes may hereby be carried out in tanks with water baths or spray nozzles. According to one aspect of the present invention, a roll assembly for guiding a pipe in a pipe extrusion line manufacturer for producing pipes of different diameter, includes a bracket, a roll supported by the bracket, and an adjustment device for automatically positioning the roll in vertical direction in dependence on a weight load upon the roll.

Pipe extrusion lines are generally known. The production of plastic pipes involves initial melting of a plastic starting material in an extruder and discharge via a pipe die. The exiting thermoplastic molten tube from the pipe die is cooled under shape constraint and calibrated. Calibration is of great importance as far as pipe dimensions and tensions in the pipe wall are concerned.

Plastic pipes are calibrated predominantly on the outside, whereby a vacuum calibration device is typically employed. The still soft molten tube is drawn shortly after discharge from the die through a calibrator which is mounted in the vacuum tank. This calibrator can be configured as sleeve-type calibrator or disk-type calibrator depending on the wall washer light. In and following the calibration path, the extruded pipes must be cooled down to such a degree as to be sufficiently stable in shape for subsequent loads.
Email ItEmail It | Print ItPrint It | CommentsComments (0) | TrackbacksTrackbacks (0) | Flag as offensiveFlag as Offensive

A pipe extrusion line for producing pipes

Posted by zhonghui on Thursday, January 06, 2011 12:27:09 AM
The roll is rotatably mounted on an axle which is supported indirectly or directly by an elastic element that forms the adjustment device. A plurality of materials and plastic recycling line known per se may be used as elastic element, such as, e.g., rubber-like elements.

According to one aspect of the present invention, a roll assembly for guiding a pipe in a pipe extrusion line for producing pipes of different diameter, includes a bracket, a roll supported by the bracket, and an adjustment device for automatically positioning the roll in vertical direction in dependence on a weight load upon the roll.

The present invention resolves prior art problems by so constructing a roll as to adjust its vertical position in dependence on the weight load acting on the flood light fixtures. Hereby, the invention is based on the recognition that pipes of greater diameter normally have a greater weight per meter. Thus, when the roll is loaded by a pipe of greater weight, and thus normally also of greater diameter, the roll moves further downwards than would be the case, when the weight load on the roll is smaller as a result of a smaller pipe and thus of smaller weight.

Email ItEmail It | Print ItPrint It | CommentsComments (0) | TrackbacksTrackbacks (0) | Flag as offensiveFlag as Offensive

the usual method of plastic recycling line

Posted by zhonghui on Tuesday, December 21, 2010 10:12:45 PM
Consequently, the usual method of disposal of plastic recycling line in landfills is buried. The use of landfills is becoming more profitable as a means to get rid of waste and has attracted much negative publicity.

Plastic pipe extrusion line is increasingly replacing wood and metal for a variety of applications, is corroded where resistance against plastic conditions in rotting wood and metal particularly useful, for example in the field of design for the construction of doors and windows in the automobile industry to make vehicles components.

Although these properties are attractive replacement for wood, plastic and metal, they create a problem for the effective elimination of flood light fixtures in the manufacture or scrapped when the product reaches the end of their useful life or damaged and must be replaced. In particular, most plastics pet bottle washing line can not be burned safely through the production of toxic gases a threat of contamination.
Email ItEmail It | Print ItPrint It | CommentsComments (0) | TrackbacksTrackbacks (0) | Flag as offensiveFlag as Offensive

The primary object of the present pvc pipe making machines

Posted by zhonghui on Wednesday, December 08, 2010 12:40:11 AM
The primary object of the present plastic corrugated pipe extrusion line is to provide the improved pvc pipe making machines having an improved connector assembly on the handle. The connector assembly mates with a shaped opening defined by the sidewall of the line body.

A plastic recyclable line including a line body having a bottom and a continuous sidewall. A pair of ears are positioned on the sidewall and include opposed shaped openings. A plastic handle has a connector assembly at each end including a pair of inwardly directed projections received by the openings. The projections include holding members positioned within the ears. The cross-section of the projections is shaped complementary with the ear openings ensuring that the handle can be moved to different predetermined positions.

The present wall washer light is directed to a plastic recyclable line. More specifically, the present invention is directed to an improved plastic line such as a pail.

Email ItEmail It | Print ItPrint It | CommentsComments (0) | TrackbacksTrackbacks (0) | Flag as offensiveFlag as Offensive

Alpha Lipoic Acid Its Role in Human Health

Posted by zhonghui on Monday, September 21, 2009 9:44:36 PM
 

Alpha-Lipoic acid is a naturally-occurring compound belongs to Synthesis Agents. It is produced in our body and is also derived from the foods we eat. Lipoic acid, also known as thioctic acid, is a relatively small molecule that plays a crucial role in our metabolic processes. It occurs in two forms, i.e. isomers called R and S, R being the natural form. Lipoic acid was initially discovered in potato extracts as a growth factor for bacteria. It was later isolated by Dr. Lester Reed and his colleagues at the University of Texas in Austin (Reed et al, 1951). Lipoic acid is now recognized as an important component of metabolic systems in all organisms from bacteria to humans. Its chemical name is 1,2-dithiolane-3-pentanoic acid. Lipoic acid is both lipid (fat)-soluble and water-soluble. This confers upon it certain unique physicochemical characteristics and provides a distinct advantage over other antioxidants.

Alpha-Lipoic acid has two important functions in our body. First, it serves as a coenzyme (i.e. facilitating the action of enzymes) in several metabolic pathways. Second, it is an important antioxidant (Packer et al, 1995).
 

Email ItEmail It | Print ItPrint It | CommentsComments (0) | TrackbacksTrackbacks (0) | Flag as offensiveFlag as Offensive

green tea extract

Posted by zhonghui on Wednesday, September 02, 2009 10:02:08 PM
 

Tea tree oil a kind of green tea extract has been recognized as a potent antiseptic in Australia anecdotally for much longer than there has been scientific evidence. However, recent studies support a role for tea tree oil in skin care and treatment of various ailments.

Tea tree oil has activity against staphylococcus aureus including MRSA, and when used at 10% concentration is comparable with mupirocin for application to the skin but has never been shown to cause resistance. However, this can occur at lower percentages. It is less successful for application in the nose.

Tea tree oil as well as grape seed extract and verbascoside are known antifungal agent, effective in vitro against multiple dermatophytes found on the skin. In vivo, shampoo with 5% tea tree oil has been shown to be an effective treatment for dandruff due to its ability to treat Malassezia furfur, the most common cause of the condition.

Effectiveness of topical tea tree oil preparations for Candidiasis is supported by their ability to kill Candida in vitro.

In the treatment of moderate acne, topical application of 5% tea tree oil has shown an effect comparable to 5% benzoyl peroxide, albeit with slower onset of action. In another study in 2007 5% strength gel was compared against a placebo, with statistically significant results.

There is some very limited research that has shown that tea tree oil may have topical anti-viral activity, especially with the Herpes virus (cold sores, chicken pox and shingles blisters, etc.)

One study has shown a 5% tea tree oil solution to be more effective than commercial medications against the scabies mite in an in vitro situation.

Email ItEmail It | Print ItPrint It | CommentsComments (0) | TrackbacksTrackbacks (0) | Flag as offensiveFlag as Offensive
« Previous1Next »